02 April ‘19

MMK plans to reconstruct its blast furnace No. 2 next year

The historically-significant blast furnace No. 2 was commissioned in the summer of 1932, a few months after the launch of the plant. Currently, it produces around 3,800 tonnes of pig iron per day.

As part of the modernisation process, MMK plans to dismantle and completely replace all parts of the old furnace, as well as to replace the cooling system. Equipment for the new cooling system will be supplied by the Luxembourg company Paul Wurth, which has been selected following the results of a tender which required the cooling systems presented to have horizontal cooling elements. Following its reconstruction, the new furnace will have non-lintel design. Paul Wurth will supply horizontal box coolers, highly-heat-conductive graphite blast-furnace brickwork and ramming compound. The package also includes a complete set of equipment for a stand-alone hydraulic power unit with heat exchangers and an accompanying closed-loop cooling system for chemically purified water. The installation process will be supervised on-site both during the pre-installation period and during the period between installation and the start-date of the furnace’s operation.

The casting beds will also be redesigned. The main technological equipment required for the production of pig iron and slag will be replaced by modern hydraulic equipment manufactured by Dneprohydromach. Similar equipment has already been installed on four MMK blast furnaces. Changes will affect the main transportation flumes, which will be equipped with convective cooling and will increase in size, facilitating the separation of pig iron from slag. The lining of transportation flumes will be made from refractory concrete. In addition, the flumes will also be equipped with an aspiration system air-duct. Gas-purifying equipment will also be supplied by Dneprohydromach in the form of aspiration systems for casting beds. As a result of this aspiration installation which has a suction capacity of 850,000 cubic meters per hour, the emission of pollutants into the atmosphere will be significantly reduced, improving working conditions for our metallurgists. At the moment, the site designated for the construction of the aspiration casting bed is being prepared. The construction of the new blast furnace will have no effect on MMK's overall steel production or on the quantity of finalised products as its reduced blast furnace production capacity will be compensated by increasing the capacity of the electric-furnace workshop.

MMK's blast furnace no. 2 was commissioned in June 1932. It was named Komsomolka to commemorate the achievement of hundreds of Komsomol members who worked on the construction of the plant. Since then, the blast furnace has been repeatedly updated - most recently in 2000, when it was rebuilt almost from scratch. The capacity of the current blast furnace is 1,380 cubic meters. In 2010, a bell-less top charging mechanism provided by Paul Wurth was installed on blast furnace no. 2.

About MMK
MMK is one of the world's largest steel producers and a leading Russian metals company. The company's operations in Russia include a large steel-producing unit encompassing the entire production chain, from the preparation of iron ore to downstream processing of rolled steel. MMK turns out a broad range of steel products with a predominant share of high-value-added products. In 2018, the company produced 12.7 mln tonnes of crude steel and 11.7 mln tonnes of commercial steel products. MMK Group had sales in 2018 of USD 8,214 mln and EBITDA of USD 2,418 mln.

Investor contacts:
Andrey Serov
tel.: +7 (3519) 24-52-97
E-mail: serov.ae@mmk.ru

Media contacts:
Dmitry Kuchumov
tel.: +7 (499) 238-26-13
E-mail: kuchumov.do@mmk.ru

Dmitry Bulin
tel.: +7 (499) 238-26-13
E-mail: bulin.dn@mmk.ru

This site uses cookies as described in our Privacy Policy and Terms of Use