Magstrong

Reference information on Magstrong steels Typical values for quenching in oil 8-25 1500-2500 475-505 1200 1500 10 (A ) 50 6t (90°) Grade Standard № Geometrical dimensions 2. 3. 4. Thickness, mm TA 14-101-1122 TA 14-101-1034 TA 14-101-1034 MAGSTRONG H400L 1. MAGSTRONG H400 MAGSTRONG H450 MAGSTRONG H500 TA 14-101-1058 1. Widths, mm Mechanical properties (Min) Hardness НВW** Impact strength, J/sm2 Yield strength, Mpa Tensile strength, Mpa Elongation А5, % Carbon equivalent, (CEV) Bend, t I. Highly rigid and wear-resistant flat products for the road-building, mine, sinking, crushing and lift-and-carry machinery. II. Hot-rolled boron-containing sheets for quenching in water and oil to manufacture agricultural machinery (plows, cultivators, sowing machines, rippers, reaping machines, harrows, screw elevators. TA MMK 328 Typical values for quenching in oil Typical values for quenching in water Typical values for quenching in water 8 7 III. High-strength structural flat products for crane building, heavy and light transport machinery, manipulator machinery. TA MMK 328 TA ММК 324 TA ММК 324 TA ММК 324 MAGSTRONG W600QL TA ММК 324 TA ММК 324 TA ММК 324 TA ММК 324 MAGSTRONG W600 Note: t   - thickness of flat products; *  - value is determined, but not standardized; ** - brinell hardness is determined on the machined surface at a depth of 0.5-3 mm below the surface of the sheet; ^ - the typical value (Not guaranteed). ≤0.53 ≤0.53 ≤0.53 ≤0.53 ≤0.44 ≤0.75 (0.66)** ≤0.75 (0.66)** ≤0.75 3.5t(90 ° ) 1.5t ( 180° ) 1.5t ( 180° ) 1.5t ( 180° ) 1.5t ( 180° ) 1.5t ( 180° ) 1.5t ( 180° ) 1.5t ( 180° ) 8 - 50 1500-4500 900 950-1150 12 2.5t (180°) MAGSTRONG W900QL TA ММК 324 ≤0.53 8 - 50 1500-4500 900 950-1150 12 2.5t (180°) 8. MAGSTRONG W900 TA ММК 324 ≤0.53 9. 8 - 20 1500-3200 10 (A ) 50 388-440 36-47(HRC) 900-1200 1100 17 -40 (KV )