Magstrong

Tensile strength, MPa Yield point, MPa Relative elongation, % -40 2 Impact strength, KCV , J/cm ≥441 ≥ 529 ≥20 ≥ 59 +20, 2 Impact strength, KCV J/cm ≥150 Typical mechanical properties of weld metal The mechanical properties of the weld metal depend on the welding method and the protective medium used. The mechanical properties of the weld metal in the original state after welding in the M21 mixture according to ISO 14175 should satisfy the following requirements - 1,6* 146 Current, A 227 Diameter, mm 381 Voltage, V 16,3 20,8 34,3 Recommended welding modes: * modes are matched for the wire diameter being in commercial production MagWire MS450 MagWire MS500 - MagWire MS700 MAGWIRE RECOMMENDATIONS FOR WELDING Предел прочности, МПа Предел текучести, МПа Относительное удлинение, % -40 2 Ударная вязкость, KCV , Дж/см +20 2 Ударная вязкость, KCV , Дж/см 490 539 20 150 47 ≥490 ≥ 539 ≥20 ≥150 ≥ 47 1,2* 135 Ток, А 201 340 Диаметр, мм 301 Напряжение, В 17,8 22,8 33,4 36,9 Предел прочности, МПа Предел текучести, МПа Относительное удлинение, % -40 2 Ударная вязкость, KCV , Дж/см +20 2 Ударная вязкость, KCV , Дж/см 490 539 20 150 47 ≥686 764 - 40 ≥17 -40 2 Ударная вязкость, KCV , Дж/см 47 ≥69 ≥ 59 ≥39 e-mail :koltsov.vg@mmk-metiz.ru тел. 8(3519) 24-70-33 On acquisition issues: www.mmk-metiz.ru 1,6* 146 Current, A 227 Diameter, mm 381 Voltage, V 16,3 20,8 34,3 Recommended welding modes: * modes are matched for the wire diameter being in commercial production Recommended welding modes: Current, A Diameter, mm Voltage, V * modes are matched for the wire diameter being in commercial production Typical mechanical properties of weld metal The mechanical properties of the weld metal depend on the welding method and the protective medium used. The mechanical properties of the weld metal in the original state after welding in the M21 mixture according to ISO 14175 should satisfy the following requirements Typical mechanical properties of weld metal The mechanical properties of the weld metal depend on the welding method and the protective medium used. The mechanical properties of the weld metal in the original state after welding in the M21 mixture according to ISO 14175 should satisfy the following requirements Tensile strength, MPa Yield point, MPa Relative elongation, % Tensile strength, MPa Yield point, MPa Relative elongation, % -40 2 Impact strength, , J/cm , 2 Impact strength J/cm -40 2 Impact strength, , J/cm -20, 2 Impact strength J/cm -60 2 Impact strength, , J/cm MMK-METIZ STEEL